Mtn Unlimited Free Browsing And Downloading With Psiphon, SAS And HTTP Injector

Hi guys, it's now time for you to browse and download free unlimitedly with your Mtn sim both on your Android phone and on your Pc. What i like most about this is that, its takes just a minutes to connect and atimes seconds. And it doesn't easily disconnect and if it do it will connect itself again instantly.

Although this tweak has been on for some days now, but due to the mixed comment have been seeing, I just decided to confirm it myself before writing anything on it and believe me its really blazing.

If you are tired of hunting magic Ips for your Etisalat, tired of the throttling issue with Etisalat chat/social pack or the capped Mtn bis plan and the frequent disconnection then you might want to give this a shot.

Unlike the Etisalat N0 magic ip tweak, this tweak actually works on many VPNs like psyhon, Simple Android Server, HTTP injector e.t.c. Other reasons why you might want to pick this over the etisalat N0 is that it connects faster, doesn't easily disconnect and it will also save you the stress of frequently searching for Ips.

In the post I will just explain in details how to connect it with psiphon, simple server and also Http injector. I will also tell you what to do if it fails to connect.

How to Configure the MTN Unlimited Free Browsing

First make sure you configure your default phone APN settings as shown below:
APN: web.gprs.mtnnigeria.net
Proxy: 127.0.0.1
Port: 8080
Skip others and save.

A. Simple Android Server Settings:
1. Download and Install Simple Server from play store.
2. Click set connection mode and select either vpn mode or Local Server
3. Click on connection settings and configure as shown below:
==> proxy host = 10.199.212.2
==> port = 8080
4. Tick Enable Header Tweaking
5. Click on chose Tweak type and select "host replacement"
6. Click on injection host and input: http://172.16.5.226@

That's all !! Just go back and start Server. Then you can now start browsing once it connects.

B. Psiphon Handler Settings:

1. Download and install your Psiphon handler from this LINK.
2. Configure the Psiphon handler menu as shown below:

==> Proxy Type = Real Host
==> Proxy Server: http://172.16.5.226@
==> Real Proxy Type: DEFAULT
==> Real Proxy Port: 80
3. After that, click on save.
4. Choose tunnel whole device.
5.under region select Best Performance or USA.
6. Click on more option and configure as shown below:
==> Tick connect through an HTTP proxy.
==> Tick use the following settings and input the following:
HOST ADDRESS: 10.199.212.2
PORT: 8080

Press your back button and connect.

C. HTTP Injector Settings:

1. Download and install http injector from this LINK.
2. Download the config file from this LINK.
3. Launch http injector, click on the three dots at the top right corner ànd select import config.
4. After that, click in start and you are good to go.

How To Configure Simple Server For PC Users

Just Open the Simple server.INI with any editor and edit just like as shown below:

LHOST = ‘127.0.0.1’
IMETHOD = 0
ISPLIT = 0
RHTTP = 0
TIMEOUT = 60
PHOST = ‘10.199.212.2’
RQUERY = ”
RPATH = 0
PTYPE = 0
KEEP = ”
BQUERY = ”
MQUERY = ”
RHTTPS = 1
PPORT = 8080
LPORT = 8080
VALHDR0 = ‘http://172.16.5.226@’
VALHDR1 = ”
VALHDR2 = ”
VALHDR3 = ”
IQUERY = ‘http://172.16.5.226@’
ADMODE = 0
CQUERY = ”
CUSHDR2 = ”
CUSHDR3 = ”
CUSHDR0 = ”
CUSHDR1 = ”
ILINE = 0
FQUERY = ”
SBUFF = 1024
RPORT = 0

Then configure any browser you wants to as:
Manual Proxy: 127.0.0.1
Port: 8080

NOTE: IF YOURS REFUSE TO CONNECT, JUST STOP YOUR PSIPHON, CLOSE IT, OFF YOUR DATA, OPEN PSIPHON AGAIN, ON DATA THEN CONNECT AGAIN.
TRY THESE TWO OR MORE TIMES IF ITS NOT CONNECTING. THIS IS THE TRICK I USE FOR ALL PSIPHON RELATED ISSUES.

What To Do If It Fails To Connect Still:
Just change your sim and do the setup again. That's all

If you have any question, feel free to drop it in the comment box below. ENJOY